NCE - North Coast Engineering

DCC Main Bus Wire, (Black), 14AWG, 50 Feet

These units provide a direct plug-in to Athearn and other locos equipped with NMRA 8 pin DCC and include Silent Running torque-compensated motor drive for ultra smooth low speed performance. Motor rating 3/4 Amp continuous, 1.2 Amp stall. All four...

Continuous 5 Amp booster that can be added to your existing DCC system. Includes P514 12v/13.8v DC International Power Supply with US power cord

Basic Engineer cab with LED locomotive address display. It uses a digital encoder, allowing flexibility when controlling multiple locomotives at different speeds. Clear, easy-to-read display, select up to 6 locomotive recalls 28 functions (F0-F28),...

Auto SW: Adds a program track output to the Power Cab. Prevents accidental programming of locos on your mainline track when using Program Track mode. Automatically disconnects your main line when in Program Track mode. Does not affect OPS mode...

Provides short circuit protection for one power district. Can be used with most DCC systems. Default trip time is 30 times faster compared to the basic overload setting in all NCE systems. Electronic circuit breaker for use on DCC layouts only. Does not...

Control one twin coil "Snap" switch machine. Has capacitive discharge for low current draw of track power. Provides connections for two "local control" pushbuttons. You can control switches from your cabs and your control panels.

5-PIN WIRING HARNESS

Digital Command Control Starter Sets - 10 Amps for O/G Scale -- PH-PRO-R Powerhouse Pro w/916 MHz Radio & RB01 Base Station

4-PIN WIRING HARNESS

NCE 4-PIN CONNECTOR PLUG

6-pin wiring harness

An ideal starter system for any train set purchase. Operate TWO trains at once. Two wires to the track and you're off and running trains. Expansion port to add extra walk around throttles, add computer control and add automation devices. Grows with your...

BTN8 Momentary SPST Normally Open Pushbutton Switch 8-Pack -- Black

3-PIN WIRING HARNESS

Snubber DCC Track Bus Noise Suppressor -- pkg(2)

Kapton Tape -- 10mm Wide, 100' Roll

TS6S On/On SPST Toggle Switch 6-Pack -- 125V - 5A

8-Circuit Eurostyle Terminal Strips -- For 14-24 AWG Wire pkg(2)

BTN8 Momentary SPST Normally Open Pushbutton Switch 8-Pack -- Green

4-Circuit Eurostyle Terminal Strips -- For 14-24 AWG Wire pkg(4)

2-pin wiring harness

12-Circuit Eurostyle Terminal Strips -- For 14-24 AWG Wire pkg(2)

TS5D On/On DPDT Toggle Switch 5-Pack -- 125V - 5A

BTN8 Momentary SPST Normally Open Pushbutton Switch 8-Pack -- Red

Kapton Tape -- 20mm Wide, 100' Roll

Male Quick Connect -- Red pkg(20)

AND-24 Anderson Power Pole Connector -- 12 Each Red & Black

Power Drop 22AWG Wire Feeders -- Red 16" 40.6cm pkg(10)

Power Drop 22AWG Wire Feeders -- Black 16" 40.6cm pkg(10)

Male Quick Connect -- Red pkg(64)

Track Bus Taps -- Blue pkg(20)

Male Quick Connect -- Red pkg(32)

Heat-Shrink Tubing Assortment -- Various Diameters 10' 3.05m Total

Power Drop 22AWG Wire Feeders -- Black 16" 40.6cm pkg(32)

Power Drop 22AWG Wire Feeders -- Red 16" 40.6cm pkg(16)

Smart Booster w/P514, SB5/5A

Power Drop 22AWG Wire Feeders -- Red 16" 40.6cm pkg(32)

Track Bus Taps -- Blue pkg(64)

Ultraflex Hook-Up 32AWG .023 Diameter Wire -- Blue 20' 6.09m

Track Bus Taps -- Blue pkg(32)

Track Bus Taps -- Yellow pkg(32)

DCC Layout Wiring KitÊ -- DCC Main Bus 100' 30.5m, Feeders, Connectors & Wire Taps

Power Drop 22AWG Wire Feeders -- Black 16" 40.6cm pkg(16)

Ultraflex Hook-Up 32AWG .023 Diameter Wire -- Black 10' 3.05m

Hook-Up Wire -- Black/White 100' 30.5m

Ultraflex Hook-Up 32AWG .023 Diameter Wire -- Gray 10' 3.05m

Hook-Up Wire -- Red/White 100' 30.5m

Ultraflex Hook-Up 32AWG .023 Diameter Wire -- Orange 10' 3.05m

Ultraflex Hook-Up 32AWG .023 Diameter Wire -- Brown 10' 3.05m

3mm LED -- Warm White pkg(20)

Hook-Up Wire -- Green/White 100' 30.5m

Ultraflex Hook-Up 32AWG .023 Diameter Wire -- White 10' 3.05m

LED Lighting Kit

A complete DCC starter system in the palm of your hand! Includes many of the features of the NCE Powerhouse PH-PRO, but at a lower price. Operates up to 6 trains plus extra cabs. Wireless compatible. Includes 120/230V power supply. 

Use one button to control multiple switches or macros on your NCE DCC system. You can have up to 30 pushbuttons, toggle switches, block detectors, etc. Can be connected for control of turnouts, signals, and other devices. Easy programming, just plug in a...

Provides circuit protection for up to six sections of your railroad. Operates with any DCC system. Factory set to 1 amp per section. Sections can be connected together for more power per section. 

Dual Relay -- 2-Amp Relay for Connection to Switch-It or Switch 8 Accessory Decoder

Usb Interface -- Computer Interface, Power Cab to USB

13.8 Volt, 3 Amp Power Supply -- For DCC Twin System

8 wire adapter, converts 6 wire cab bus signals to 8 wire cab bus signals.

DCC Auto Reverse Module -- Suitable for 1 to 10amp DCC Systems

6PK-1.00 1.00-Amp Replacement Lamps -- For CP6 (Sold Separately) pkg(6)

Loco Wiring Kit for N/HO: Kit contains 8 wire colors (80 feet ultra flex 30/32 AWG wire) and 3 sizes of heat shrink

12/13.8 Volt DC, 5 Amp internationally approved power supply. This is a replacement power supply for the SB5 Smartbooster.

Brutus Transformer for PB110a -- 10 Amp, 18V AC

PH-PRO-R Wireless Power Pro

6-Wire Straight Cab Bus Cable -- RJ12-12 - 12' RJ12 Cable For UTP/DIN Panel Wiring

Detects DCC track current being drawn through a single track feeder. Isolated so there is no direct electrical connection to the track. Needs no external power for most operations. Can be connected to the NCE AIU01 or Mini Panel. Can an light up LED or...

A perfect companion for any DCC operation and layout. Self-contained unit allows you to program and test any decoder before its installed in your loco. Can be used to test track power as well as accessory decoders and functions OF, OR, F1 and F2...

Plug-Pack -- NMRA 8-Pin Plugs pkg(10)

P114 - Power Supply for Power Cab #524-25 (Sold Separately) -- 13.8 Volts DC, 24 Watts

Cab Bus Fascia Panel, 4 RJ12 Jacks

Cab Bus Fascia Panels -- DIN Panel - With DIN Connectors

D13WP 4-Function DCC Control Decoder w/8-Pin DCC Plug -- 1.03 x .63 x .185" 26 x 16.5 x 4.7mm

N14A3 Board Replacement DCC Decoder -- Fits Atlas GP39-2, Intermounatin SD40-2 and Similar

N14K2 Drop-In Control-Only Decoder with Pre-Soldered Motor Clips -- Fits Walthers-LL RS2, GP18, Kato RS-RSC2, SD80MAC, SD90-43MAC

D13J Decoder - new smaller replacement for D13SRJ Direct plug equipped with NMRA 9 pin DCC “Quick Plug” and a 9 pin 8" harness is also included. Dimensions: 1.03 x 0.630 x .185 inches – 26 x 16.5 x 4.7 mmSilent Running torque compensated motor...

D13J 4-Function DCC Control Decoder w/9-Pin DCC Plug -- 10-Pack: 1.03 x .63 x .185" 26 x 16.5 x 4.7mm

Light-It pkg(3) -- Universal Lighting and Signal Decoder

N14K1 Drop-In Control-Only Decoder with Pre-Soldered Motor Clips -- Kato ES44, AC4400, C30-7, C44, Early SD40-2 & Snoot, SD40-45-70, Athearn F-F

N12-NEM Plug-In 4-Function Decoder - 6-Pin NEM 651 Connector

Light-It pkg(6) -- Universal Lighting and Signal Decoder

D13J 4-Function DCC Control Decoder w/9-Pin DCC Plug -- 4-Pack: 1.03 x .63 x .185" 26 x 16.5 x 4.7mm

D13W 4-Function DCC Control Decoder - Wired -- pkg(10) 1.03 x .63 x .19 26 x 16.5 x 4.7mm