TCS - Train Control Systems

K0D8-F DCC Control Decoder -- Fits Kato FP7A

28X18MM MICRO WOWSPEAKER

UNIV-SH3-C Universal Speaker Housing w/Speaker -- Fits TCS 20mm Round Speaker (Use in Loco Body w/See-Through Fan Housing)

Micro WOWSpeaker -- .8 Watt, 8 Ohm, 13.6 x 9.6 x 2.9mm

EU821 DCC Control 8-Function Decoder w/MTC 21-Pin Connector -- .797 x .614 x .198" or 20.24 x 15.58 x 5mm

Trainspeed4 Train Speedometer -- Detects Four Locations

K7D4 4-Function Drop-In DCC Decoder -- Fits Kato Siemens ACS-64 and EMD SDP40F

K5D7 4-Function DCC Decoder -- Fits Kato F40PH, Includes Headlight LEDs and Red Marker LED

W2 Brass Axle Power Pickup Wipers -- Each: .88 x .25", .25" Diameter Center Hole pkg(6)

IMFP4-NF 4-Function DCC Decoder -- Fits Intermountain FP7, FP9 w/Soldered-Wire Motor Mount

K6D4 DCC Decoder -- Fits Kato FEF-3 4-8-4

IMD4-W

KAT22 T1 2-Function Decoder w/Built-In Keep Alive Device -- 1.315 x 0.65" or 33.4 x 16.51mm

KAM4P-MH 4-Function Wired DCC Decoder w/Built-In Keep-Alive(TM) -- 8-Pin Plug on 3-1/2" 8.9cm Harness, .945 x 0.66 x 0.33" 3.34 x 2.4 x .83

6-Pin Micro Connector -- .256 x .62 x .126" w/6" Wire Leads (color)

LL8-KAC 4-Function Drop-In DCC Decoder w/TCS Keep Alive Wires - Control Only -- With 2-Pin Connector for KA Unit Fits Life-Like PROTO 2000

MC4-KA 4-Function DCC Decoder w/TCS Keep Alive Wires - Control Only -- No Harness w/blue, black/white Wires .4 x .72 x .19" or 10.7 x 18.4 x 4.9mm

The T4-LED is a non-sound decoder with 4 lighting functions. Each lighting function output (F0F, F0R, F1, and F2) has an on-board resistors for use with LED's. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug...

A4X-KAC 4-Function Drop-In DCC Decoder w/TCS Keep Alive Wires - Control Only -- With 2-Pin Connector for KA Unit Fits Atlas & Others w/Tab-Connections

T6X-KAC 6-Function DCC Decoder w/TCS Keep Alive Wires - Control Only -- No Harness; With 2-Pin Connector for KA Unit .66 x 1 x .22" 16.8 x 24.6 x

T6X-KA 6-Function DCC Decoder w/TCS Keep Alive Wires - Control Only -- No Harness; With blue, black/white Wires .66 x 1 x .22" 16.8 x 24.6 x 5.5m

KAT24 Decoder w/KA2

M4-KA 4-Function DCC Decoder w/TCS Keep Alive Wires - Control Only -- Hardwire w/Extra blue, black/white Wires .37 x .59 x .11" or 9.3 x 14.9 x

T4X-KAC 4-Function DCC Decoder w/TCS Keep Alive Wires - Control Only -- No Harness; With 2-Pin Connector for KA Unit .66 x 1 x .22" 16.8 x 24.6 x

DP5-KAC 5-Function Direct Plug DCC Decoder w/Keep Alive Wires - Control Only -- 8-Pin for Atlas, Kato, Athearn w/2-Pin Connector for KA Unit .51 x .6 x .1"

DP2X-KAC 2-Function Direct Plug DCC Decoder w/Keep Alive Wires - Control Only -- 8-Pin w/2-Pin Connector for KA Unit .37 x .59 x .11" or 9.3 x 14.9 x 2.8mm

DP2X-KA 2-Function Direct Plug DCC Decoder w/TCS Keep Alive Wires - Control On -- 8-Pin w/Extra blue, black/white Wires .37 x .59 x .11" or 9.3 x 14.9 x 2.8

T1-KA 2-Function DCC Decoder w/TCS Keep Alive Wires - Control Only -- Hardwire w/Extra blue, black/white Wires .66 x 1 x .22" 16.8 x 24.6 x 5.5m

A6X-KA 6-Function Drop-In DCC Decoder w/TCS Keep Alive Wires - Control Only -- With Extra blue, black/white Wires Fits Atlas & Others w/Tab-Connections

DP5-KA 5-Function Direct Plug DCC Decoder w/Keep Alive Wires - Control Only -- 8-Pin for Atlas, Kato, Athearn w/Extra blue, black/white Wires .51 x .6 x .1

A6X-KAC 6-Function Drop-In DCC Decoder w/TCS Keep Alive Wires - Control Only -- With 2-Pin Connector for KA Unit Fits Atlas & Others w/Tab-Connections

T4X-KA 4-Function DCC Decoder w/TCS Keep Alive Wires - Control Only -- No Harness; With blue, black/white Wires .66 x 1 x .22" 16.8 x 24.6 x 5.5m

T6XA 6-Function DCC Decoder - Control Only -- No Harness, Use 9-Pin JST Male (Not Included) .661 x .969 x .217"

M1P-3.5" 1 Amp, 2 Function DCC Decoder - Control Only -- With 3.5" 8.89cm Harness, NMRA 8-Pin Plug

M1P-1" 1 Amp, 2 Function DCC Decoder - Control Only -- With 1" 2.5cm Harness, NMRA 8-Pin Plug

DP2-LL 2-Function DCC Decoder w/Direct 8-Pin NMRA Plug On Board - Control Only -- Direct Board Mounted Plug .474 x .702 x .16" or 12.04 x 17.83 x 4.06mm

MC4A 4-Function DCC Decoder - Control Only -- No Harness, Use 7-Pin JST Male (Not Included) .42 x .723 x .191"

Z2P-1" 2-Function DCC Decoder -- 1" 2.54cm Harness & NMRA 8-Pin Plug .245 x .525 x .11" 6.22 x 13.34 x 2.7mm

T-3.5" TO 21PIN HARNESS

Lighting Kit Add-On for K4D6 (#745-1414) Decoder -- Fits Kato MPI MP36PH Diesel - Adds Strobe & Rear Light

Z2P-3.5" 2-Function DCC Decoder -- 3.5" 8.89cm Harness & NMRA 8-Pin Plug .245 x .525 x .11"

Mini Connector Set (1 Male, 1 Female) -- 6-Pin 2 x 3 Array Set .165 x .119 x .465" w/6" 15.2cm w/ Colored Wires

MC2A 2-Function DCC Decoder - Control Only -- No Harness, Use 7-Pin JST Male (Not Included) .42 x .723 x .191"

K0D8-C 8-Function Drop-In DCC Decoder -- Fits Kato F40PH

IMFP4 4-Function Drop-In DCC Decoder -- Fits Intermountain FP7 & FP9

FL4 Function-Only Decoder -- 4 Lighting Functions, Hardwire Only .585 x .36 x .115"

MP-15N 4-Function Drop-In DCC Decoder -- For Atlas MP15

T6X 6-Function DCC Decoder w/Detachable Harness - Control Only -- Hardwire, .661 x .969 x .217" 16.79 x 24.61 x 5.51mm

VR 1.5 Voltage Regulator -- .428 x .717 x .166" or 10.87 x 18.21 x 4.22mm

A6X 1.3 Amp, 6 Function DCC Decoder - Control Only -- Fits PROTO, Atlas, Athearn, Bachmann, Kato - 2.86 x .68 x .145"

MC2P-SH 2-Function DCC Decoder w/Detachable Harness - Control Only -- Short Harness, NMRA 8-Pin Plug .42 x .723 x .191" 10.67 x 18.36 x 4.85mm

WOW Speaker -- Oval 1.37 x .63 35 x 16mm

HO Decoder Harness, Keep-Alive KAT16/6-Function 1A

T1-KAC 2-Function DCC Decoder w/TCS Keep Alive Wires - Control Only -- With 2-Pin Connector for KA Unit Only .66 x 1 x .22" 16.8 x 24.6 x 5.5mm

IMD4 4-Function Drop-In DCC Decoder -- Fits Intermountain SD40T-2, SD45T-2 and SD45-2

KAT26 T1 6-Function Decoder w/Built-In Keep Alive Device -- 1.315 x 0.65" or 33.4 x 16.51mm